Accessories

ADAPT-326

Set of 6" Diameter Core Adapters

Allows use of label rolls with 6" diameter core.
May be added to any 3" (76mm) dia. "CHUCK" Rewinders or Unwinders.
Use with any...

APG-MC

Optional APG , Adjustable Paper Guide for MC-11 or the MC-10A. Helps guide the outer edge of the label material for even roll edge. (Pictured on MC-11 Rewinder)

BURST-180-DELUXE

The Burst-180-Deluxe (pictured on a CAT-3-CHUCK Rewinder) - Attaches to your CAT-3-CHUCK Rewinder or your UCAT-3-CHUCK Unwinder to conveniently burst perforated tags or labels. Use "in-line" with your printer or "off-line"...

EXG-RR-6

Optional Exterior Roll Guide Set, for RR-300 Series Label Counters & Rewinders.

Exterior roll guides that assist to maintain the roll edge flush while rewinding.

FIN SET 31mm

Replacement 3” Core adapters for the MC-10A Allows for 3” Core Rewinding on the MC-10A. Set of 3 with hardware.

FIN SET 96mm

Replacement 6” Core adapters Set of three (3) steel Fins plus hardware for unwind Shaft. Enables the unwind shaft to handle 6” diameter cores.

FLANGE-QC-16-OUTER

Optional Outer Flange for “Quick-Chuck” Shaft UCAT-40 models.

FLANGE-QC-18-OUTER

Optional Outer Guide Flange, 18" OD, for 3" diameter Quick-Chucks of CAT-3-R18 Rewinders.

FOOTSWITCH

Optional Foot Switch

Allows for easy start/stop of the TWIN-CAT by simply pressing the Switch.
Desired function ("Press-to-Stop" or "Press-to-Go") is specified at the time of order.

HTO-CAT

High Torque Option for CAT-3 Rewinders. Increases torque and rewind speed.

Electrical upgrade that can be added to CAT Rewinders
Does not include Rewinder Drive Unit shown in...

INSP-10

Optional 10” wide Inspection Station for visual or manual scanning of labels as they are being wound.

INSP-6

Optional 6” wide Inspection Station for visual or manual scanning of labels as they are being wound.

INSP-8

Optional 8” wide Inspection Station for visual or manual scanning of labels as they are being wound.

LTO-CAT

Low Torque Option for CAT-3 Rewinders. Permits fine-tuning of torque and rewind speed.

LTO-TC3

Optional Low Torque Control for the TWIN-CAT-3 Rewinder. Dual Control Low-Torque Option for delicate label webs.

This item must be included in the original purchase of TWIN-CAT-3.

MPG-12

Adjustable Paper Guide (Pictured on OMNI-CAT-ACH Rewinder)

Guides the outer edge of the label roll to ensure an even edge
Use with any 12" diameter roll
Magnetic base holds...

MPG-16

Adjustable Paper Guide (Pictured on OMNI-CAT-ACH Rewinder)

Guides the outer edge of the label roll to ensure an even edge
Use with any 16" diameter roll
Magnetic base holds...

PCS-1

Optional Digital Preset Counter for counting labels on Slitter/Rewinder Combo units.

PCS-2

Optional Digital Preset Scaling Counter for counting labels on Slitter/Rewinder Combo units.

PCT-1

Optional Preset Counter for counting labels. External Halt cable included to allow Rewinder to shut down when desired Preset count is reached. (Requires an “INSP” fixture for use on the...

PLATE, ALIGN-U

Universal Alignment Plate for use together with your Winder and Printer.

Description

This Alignment Plate can be used together with virtually any printer, and enables you to...

PLATE, EP-6000-RW

Rewinder Alignment Plate for use together with the Epson C6000 Series Printer.

Description

This Alignment Plate is made specifically for use together with the Epson C6000 Series...

PLATE, EP-6000-UW

Unwinder Alignment Plate for use together with the Epson C6000 Series Printer.

Description

This Alignment Plate is made specifically for use together with the Epson C6000 Series...

PLATE, EP-6500-RW

Rewinder Alignment Plate for use together with the Epson C6500 Series Printer.

Description

This Alignment Plate is made specifically for use together with the Epson C6500 Series...