Accessories

ACH-RR-400

Adjustable Core Holder for RRC-400 and RRC-400-U.

Core Diameter: 1" - 4"Adjustable (25-101mm)
Max. Media Width: 6.7” (170mm)
Mounting: Setscrew, press fit
Composition: Steel and Anodized Aluminum
Warranty: 3...

ADAPT-326

Set of 6" Diameter Core Adapters

Allows use of label rolls with 6" diameter core.
May be added to any 3" (76mm) dia. "CHUCK" Rewinders or Unwinders.
Use with any...

APG-CAT

Adjustable Paper Guide (Pictured on CAT-3-ACH Rewinder)

Guides the outer edge of the label web to ensure an even roll edge.
Use with any 12" diameter roll.
Installs in...

APG-MC

Optional APG , Adjustable Paper Guide for MC-11 or the MC-10A. Helps guide the outer edge of the label material for even roll edge. (Pictured on MC-11 Rewinder)

AUTO-MATE

Automatic Labeling Option for Automatic Bottle Label Applicators. The Foot Pedal is still included, but is not necessary.

Sensor that automatically starts the labeling action when a bottle is...

BH-1

Optional Blade Holder Assembly. Add an additional Slitting blade to your Slitter in minutes.

BMC-1

Optional Label Counter for Automatic Bottle Label Applicators.

Counts the labels as they are applied to the bottles
Factory installed option at the time of BOTTLEMATE order
NOTE: The...

BMR-6

Optional Waste Liner Rewinder for Automatic Bottle Label Applicators.

Rewinds the waste liner as the labels are applied to the bottles
Factory installed option at the time of BOTTLEMATE...

BP-LD

Optional Battery Pack for Label Dispensers.

Make your Label Dispenser Mobile!
Battery Pack that allows your Label Dispenser to operate without plugging-in to a wall outlet
Battery Charger...

BURST-180-DELUXE

The Burst-180-Deluxe (pictured on a CAT-3-CHUCK Rewinder) - Attaches to your CAT-3-CHUCK Rewinder or your UCAT-3-CHUCK Unwinder to conveniently burst perforated tags or labels. Use "in-line" with your printer or "off-line"...

FIN SET 31mm

Replacement 3” Core adapters for the MC-10A Allows for 3” Core Rewinding on the MC-10A. Set of 3 with hardware.

FIN SET 96mm

Replacement 6” Core adapters Set of three (3) steel Fins plus hardware for unwind Shaft. Enables the unwind shaft to handle 6” diameter cores.

FLANGE-16-OUTER

Optional Outer Flange for Fin-Style Shaft UCAT-16 models.

FLANGE-CAT-OUTER

Optional Outer Flange for Standard Shaft UCAT-3, UCAT-1 models.

FLANGE-QC-12-INNER

Optional Inner 12” Flange for 3” and 4” core Quick-Chuck Shaft.

FLANGE-QC-12-OUTER

Optional Outer Flange for “Quick-Chuck” Shaft UCAT-1, UCAT-3 models.

FLANGE-QC-16-INNER

Optional Inner 16” Flange for 3” and 4” core Quick-Chuck Shafts.

FLANGE-QC-16-OUTER

Optional Outer Flange for “Quick-Chuck” Shaft UCAT-40 models.

FLANGE-QC-18-INNER

Inner Guide Flange, 18" OD, for 3” and 4” diameter Quick-Chuck Shafts. Used on CAT-3-R18 Rewinders.

FLANGE-QC-18-OUTER

Optional Outer Guide Flange, 18" OD, for 3" diameter Quick-Chucks of CAT-3-R18 Rewinders.

FLANGES-LD

Optional Label Flanges provide tension on the label supply roll for easier peeling of labels from their backing material. Ideal option for hard to peel and super sticky labels.

...

FOOTSWITCH

Optional Foot Switch

Allows for easy start/stop of the TWIN-CAT by simply pressing the Switch.
Desired function ("Press-to-Stop" or "Press-to-Go") is specified at the time of order.

HSB-10

Optional Replacement Slitting Blades.

Pack of 10 Blades.

HTO-CAT

High Torque Option for CAT-3 Rewinders. Increases torque and rewind speed.