Cart 0

Product Accessories

ADAPT-326

ADAPT-326

Set of 6" Diameter Core Adapters

  • Allows use of label rolls with 6" diameter core.
  • May be added to any 3" (76mm) dia. "CHUCK" Rewinders or Unwinders.
  • Use with any...
APG-CAT

APG-CAT

Adjustable Paper Guide (Pictured on CAT-3-ACH Rewinder)

  • Guides the outer edge of the label web to ensure an even roll edge.
  • Use with any 12" diameter roll.
  • Installs in...
BAIL-MC

BAIL-MC

Replacement Bail for the MC-10A. Allows for Coreless Rewinding on the MC-10A. Rewinder serial number required for purchase of this item.
BURST-180-DELUXE

BURST-180-DELUXE

The Burst-180-Deluxe (pictured on a CAT-3-CHUCK Rewinder) - Attaches to your CAT-3-CHUCK Rewinder or your UCAT-3-CHUCK Unwinder to conveniently burst perforated tags or labels.  Use "in-line" with your printer or "off-line"...
FIN SET 31mm

FIN SET 31mm

Replacement 3” Core adapters for the MC-10A Allows for 3” Core Rewinding on the MC-10A. Set of 3 with hardware.
FLANGE-QC-16-OUTER

FLANGE-QC-16-OUTER

Optional Outer Flange for “Quick-Chuck” Shaft UCAT-40 models.
FOOTSWITCH

FOOTSWITCH

Optional Foot Switch

  • Allows for easy start/stop of the TWIN-CAT by simply pressing the Switch.
  • Desired function ("Press-to-Stop" or "Press-to-Go") is specified at the time of order.
HTO-CAT

HTO-CAT

High Torque Option  for CAT-3 Rewinders. Increases torque and rewind speed.
INSP-10

INSP-10

Optional 10” wide Inspection Station for visual or manual scanning of labels as they are being wound.
INSP-6

INSP-6

Optional 6” wide Inspection Station for visual or manual scanning of labels as they are being wound.
INSP-8

INSP-8

Optional 8” wide Inspection Station for visual or manual scanning of labels as they are being wound.
LTO-CAT

LTO-CAT

Low Torque Option for CAT-3 Rewinders. Permits fine-tuning of torque and rewind speed.
LTO-TC3

LTO-TC3

Optional Low Torque Control for the TWIN-CAT-3 Rewinder. Dual Control Low-Torque Option for delicate label webs.

    • This item must be included in the original purchase of TWIN-CAT-3.
PC-1

PC-1

Optional Preset Counter for counting labels. External Halt cable included to allow Rewinder to shut down when desired Preset count is reached. (Requires an “INSP” fixture for use on the...
PCS-1

PCS-1

Optional Digital Preset Counter for counting labels on Slitter/Rewinder Combo units.
ROLLER KIT, RR-10"

ROLLER KIT, RR-10"

Optional 10" Roller Kit Upgrade.
  • This Roller Kit upgrade gives the machine the ability to wind material widths up to 10".
ROLLER KIT, RR-8"

ROLLER KIT, RR-8"

Optional 8" Roller Kit Upgrade.
    • This Roller Kit upgrade gives the machine the ability to wind material widths up to 8".
SHAFT, CAT-STD

SHAFT, CAT-STD

6” wide Standard fin-style Rewind Shaft.
    • Core Diameter - 3" (76-mm)
    • Label Width - 6” (152-mm)
    • Roll Diameter - 12” (304-mm)
SHAFT, CAT-W10

SHAFT, CAT-W10

10” wide standard fin-style Rewind Shaft.
    • Core Diameter - 3" (76-mm)
    • Label Width - 10” (254-mm)
    • Roll Diameter - 12” (304-mm)
SHAFT, TC-1

SHAFT, TC-1

1” Rewind Shaft, with 2 Label Flanges.
    • Core Diameter - 1”
    • Label Width - 6” (152-mm)
    • Roll Diameter - 8.6” (220-mm)
SHAFT, TC-CL

SHAFT, TC-CL

Coreless Rewind Shaft, with 2 Label Flanges and Rewind Bail.
    • Core Diameter - Coreless
    • Label Width - 6” (152-mm)
    • Roll Diameter - 8.6” (220-mm)
TC-C76-170

TC-C76-170

6” wide “Quick-Chuck” Shaft, with 2 Label Flanges.
    • Core Diameter - 3”
    • Label Width - 6.7” (170-mm)
    • Roll Diameter - 8.6” (220-mm)
TC-C76-220

TC-C76-220

8.6” wide “Quick-Chuck” Shaft, with 2 Label Flanges.
    • Core Diameter - 3”
    • Label Width - 8.6” (220-mm)
    • Roll Diameter - 8.6” (220-mm